54" 3 blade deck blade with 5 point star hole used on Craftsman, Poulan, Husqvarna. 18 1/2 inches long, 3 inches wide, .187" thick

173920, 180054 Replacement Blade for 48" Deck. 16 3/4" long, 2 1/2" wide, .204" thick, 5 point star hole. High lift, the blade to get if you have a bagger. Used to replace the 173921 (mulch) if you do not want to mulch. This deck has 3 blades.

Our deluxe thick cushioned seat cover provides superior protection, all day riding comfort and lots of storage. Two side mesh stuff beverage pockets hold drinks and a big rear zippered cargo pocket and mesh stuff pocket keep tools and gear readily available. There's even a little zippered side key. An elastic cord in the hem provides a custom fit. Includes a handy fabric storage case and John Deere key ring. Three year warranty. Large fits backrests up to 18 inches

Aftermarket Belt the same size as the stock #'s mentioned at considerably less cost than the OEM belt. Use on 48" 3 blade deck. The protective cover is made of a synthetic rubber compound having excellent resistance to heat, oil and abrasion. This is the primary belt, the one that goes from the deck to the pulley on the engine.

Heavy Duty 21" blade used on 42" Craftsman, Poulan, Wizard, & Husqvarna decks. Has star 5 point hole and has much thicker steel than OEM blades. Will not mulch or work well with a bagger, we call this the field blade. Best blade available for rough conditions, will bend but you have to work harder to do it. Idea for situations like wet high field grass, has less lift and drag and is easier on belts.

Aftermarket Belt the same size as the stock #'s mentioned at considerably less cost than the OEM belt. The protective cover is made of a synthetic rubber compound having excellent resistance to heat, oil and abrasion.

Heavy duty deck belt V-Idler pulley replaces AYP 139245. Used on AYP, Craftsman, Sears, Poulan, Wizard, Husqvarna lawn tractors. ID /38", OD 3 1/2", 1 1/8" high.

Aftermarket Belt the same size as the stock #'s mentioned at considerably less cost than the OEM belt. Used on newer 42" two blade decks. The protective cover is made of a synthetic rubber compound having excellent resistance to heat, oil and abrasion.

Used on vari-drive MTD made LT's. This is the secondary belt or the belt going from the Transmission pulley to the variable drive pulley. Used on 600 series variable speed units. A 5/8 X 48" belt can also be used for this application however we recommend this belt made to OEM specs. This belt is a little wider than 5/8". A generic 5/8 X 48" belt is slightly different and costs only a little less than this belt. Use this belt for better results on vari-drive untis.